3.3.2.20. NXtofnpdΒΆ

Status:

application definition, extends NXobject

Description:

This is a application definition for raw data from a TOF neutron powder diffractometer

Symbols:

No symbol table
Groups cited:
NXdata, NXdetector, NXentry, NXinstrument, NXmonitor, NXsample, NXuser

Structure:

entry: (required) NXentry

title: (required) NX_CHAR

start_time: (required) NX_DATE_TIME

definition: (required) NX_CHAR

Official NeXus NXDL schema to which this file conforms

Obligatory value: NXtofnpd

pre_sample_flightpath: (required) NX_FLOAT {units=NX_LENGTH}

This is the flight path before the sample position. This can be determined by a chopper, by the moderator or the source itself. In other words: it the distance to the component which gives the T0 signal to the detector electronics. If another component in the NXinstrument hierarchy provides this information, this should be a link.

user: (required) NXuser

name: (required) NX_CHAR

(instrument): (required) NXinstrument

detector: (required) NXdetector

data[ndet, ntimechan]: (required) NX_INT

detector_number[ndet]: (required) NX_INT

distance[ndet]: (required) NX_FLOAT {units=NX_LENGTH}

distance to sample for each detector

time_of_flight[ntimechan]: (required) NX_FLOAT {units=NX_TIME_OF_FLIGHT}

polar_angle[ndet]: (required) NX_FLOAT {units=NX_ANGLE}

polar angle for each detector element

azimuthal_angle[ndet]: (required) NX_FLOAT {units=NX_ANGLE}

azimuthal angle for each detector element

(sample): (required) NXsample

name: (required) NX_CHAR

Descriptive name of sample

(monitor): (required) NXmonitor

mode: (required) NX_CHAR

Count to a preset value based on either clock time (timer) or received monitor counts (monitor).

Any of these values: monitor | timer

preset: (required) NX_FLOAT

preset value for time or monitor

distance: (required) NX_FLOAT {units=NX_LENGTH}

data[ntimechan]: (required) NX_INT

time_of_flight[ntimechan]: (required) NX_FLOAT {units=NX_TIME_OF_FLIGHT}

data: (required) NXdata

data –> /NXentry/NXinstrument/NXdetector/data

detector_number –> /NXentry/NXinstrument/NXdetector/detector_number

time_of_flight –> /NXentry/NXinstrument/NXdetector/time_of_flight

NXDL Source:
https://github.com/nexusformat/definitions/blob/master/applications/NXtofnpd.nxdl.xml