3.3.2. Application DefinitionsΒΆ
A description of each NeXus application definition is given. NeXus application definitions define the minimum set of terms that must be used in an instance of that class. Application definitions also may define terms that are optional in the NeXus data file. The definition, in this case, reserves the exact term by declaring its spelling and description. Consider an application definition as a contract between a data provider (such as the beam line control system) and a data consumer (such as a data analysis program for a scientific technique) that describes the information is certain to be available in a data file.
- NXarchive
- This is a definition for data to be archived by ICAT (http://www.icatproject.org/).
- NXarpes
- This is an application definition for angular resolved photo electron spectroscopy.
- NXdirecttof
- This is a application definition for raw data from a direct geometry TOF spectrometer
- NXfluo
- This is an application definition for raw data from an X-ray fluorescence experiment
- NXindirecttof
- This is a application definition for raw data from a direct geometry TOF spectrometer
- NXiqproc
- Application definition for any
data. - NXlauetof
- This is the application definition for a TOF laue diffractometer
- NXmonopd
- Monochromatic Neutron and X-Ray Powder diffractometer
- NXmx
- functional application definition for macromolecular crystallography
- NXrefscan
- This is an application definition for a monochromatic scanning reflectometer.
- NXreftof
- This is an application definition for raw data from a TOF reflectometer.
- NXsas
- raw data from 2-D monochromatic SAS data with an area detector
- NXsastof
- This is an application definition for small angle scattering using a 2D detector in TOF mode.
- NXscan
- Application definition for a generic scan instrument.
- NXspe
- NXSPE Inelastic Format. Application definition for NXSPE file format.
- NXsqom
- This is the application definition for S(Q,OM) processed data.
- NXstxm
- Application definition for a STXM instrument.
- NXtas
- This is an application definition for a triple axis spectrometer.
- NXtofnpd
- This is a application definition for raw data from a TOF neutron powder diffractometer
- NXtofraw
- This is an application definition for raw data from a generic TOF instrument
- NXtofsingle
- This is a application definition for raw data from a generic TOF instrument
- NXtomo
- This is the application definition for x-ray or neutron tomography raw data.
- NXtomophase
- This is the application definition for x-ray or neutron tomography raw data with phase contrast variation at each point.
- NXtomoproc
- This is an application definition for the final result of a tomography experiment: a 3D construction of some volume of physical properties.
- NXxas
- This is an application definition for raw data from an X-ray absorption spectroscopy experiment.
- NXxasproc
- Processed data from XAS. This is energy versus I(incoming)/I(absorbed).
- NXxbase
- This definition covers the common parts of all monochromatic single crystal raw data application definitions.
- NXxeuler
- raw data from a four-circle diffractometer with an eulerian cradle, extends NXxbase
- NXxkappa
- raw data from a kappa geometry (CAD4) single crystal diffractometer, extends NXxbase
- NXxlaue
- raw data from a single crystal laue camera, extends NXxrot
- NXxlaueplate
- raw data from a single crystal Laue camera, extends NXxlaue
- NXxnb
- raw data from a single crystal diffractometer, extends NXxbase
- NXxrot
- raw data from a rotation camera, extends NXxbase